Model:XW9-R7 Part-turn Manual-Operator Worm Gearbox
Introduction
Part-turn worm gearboxes used for applications such as Ball Valves, Butterfly Valves, Plug Valves, Dampers.
- The maximum out-torque is up to 100,000 Nm
- Input Flange:F16/F25
- Output Flange can be F40/F48/F60
- Max Stem Dia:220 mm
- Max height of stem:265 mm
- Comprehensive gear ratios combined with a selection of spur input- reducers
- Removable output drive sleeves
Characters
1. Totally enclosed gearing with good sealing
2. Ductile cast iron housing, reliable strength
3. Grease filled, increase the service life
4. Optional input structure, flexible input mode
5. Optional ratio of double-stage gearbox, used in a wide range
6. Adjustable angle of output end cap, flexible modes of installation
7. Optional output flange type
8. High performance of tapered roller bearing, can withstand axial and also radial forces
9. Sealed structure, good waterproof effect, can be up to IP68 if required
10. Adjustable stopper, 0 °and 90 °(±5 °adjustable)
Operating Environment
XW series part-turn worm gearbox are with good mechanical quality and steady operating performance which apply to deal with variety climate and temperature. We strive to develop XW series worm gear operator to meet higher demands.
Enclosure: IP67 standard (Optional IP68 as required)
Working Temperature: From -20ºC to 120ºC ( -4ºFto 248ºF)
Painting: Silver grey (Customization)
Connect With Valve
The flange connecting to valve is according to ENISO5210 or DIN3210 (Customization)
Audited Supplier 
){kind=link}